WS SERIES - WS650FL

SPECIFICATIONS

DESCRIPTION

DOWNLOADS

Driver

6.5” MetaPlexTM Composite Cone with Butyl Rubber Surround

 

Tweeter

Diffractionless 1” (25mm) Pivoting, Silk Dome Tweeter, Ferrofluid Cooled

 

Frequency Response

42Hz - 20kHz

 

Impedance

8 Fixed Crossover

 

Power Handling

5 - 100 Watts

 

SPL

90 dB 1W/1m

 

Diameter X Depth X Width

12 1/16” (310mm) x 8 3/16” (208mm) x 3 1/4” (83mm)

 

Retrofit Cutout

10 13/16” (270mm) x 6 3/4” (172mm)

 

FastLoc Grille

13 5/8” (346mm) x 8 7/8” (225mm)

 

Bracket Type

NC6WB

6.5” 2-Way, In-Wall, Coaxial, Infinite Baffle Loudspeaker w/FastLoc™ Grille

 

The easy to install WS series speakers are a full range In-Wall loudspeaker that incorporates high tech woofer materials with a butyl rubber surround and a state-of the-art pivoting dome Ferrofluid cooled tweeter. The pivoting tweeter allows for deeper penetration into the room and concentrated sound to the sweet spot.

 

The FastLoc™ grill patent no. 8,422,722, is a feature found only at Current Audio. Our design has allowed for the smallest exposed plastic bezel in the industry, truly making it disappear into the mounting surface. The FastLoc™ grille's unique patent pending mechanism allows for a quick installation and removal of the grill while securely fastening it in place to all types of mounting surfaces. Due to the unique design the grill will conform to uneven surfaces including popcorn, heavy textured and uneven ceilings. While our competitors have chosen to utilize magnets in their

designs thus requiring the use of a steel grill that will rust our design allows us to use corrosion and rust resistant aluminum.

 

This revolutionary combination provides superior and more natural sound for both foreground and background applications. In addition the WS651FL incorporates a 3 position equalization switch, one each for bass and treble to fine tune the acoustics and allow for various room surfaces.

 

 

Driver Material: MetaPlex™

• This is an electronically bonded substrate on a copolymer cone. Basically it is a trilaminate cone, the first layer is a copolymer base material. The second layer is a material that allows the third layer (green colored surface) to bond to the copolymer.

 

• Copolymer cones alone are found in other speakers. The key to our material is that the green coating allows for a well damped material (the first layer) to combine with a low mass high stiffness coating (the green layer). This improves the performance by stiffening a cone material that is normally used alone in entry level speakers. Better midrange performance and less bass distortion is the result from less cone breakup.

 

 

Tweeter Material: Silk Dome Tweeter

 

• Our silk dome tweeters use a treated silk soft dome. This material is neutral sounding and is used in many higher end bookshelf and cabinet speakers.

WS SERIES - WS650FL

WS SERIES - WS650FL
WS SERIES - WS650FL
WS SERIES - WS650FL
WS SERIES - WS650FL
WS SERIES - WS650FL
WS SERIES - WS650FL
WS SERIES - WS650FL