WS SERIES - WSLCR650FL

SPECIFICATIONS

DESCRIPTION

DOWNLOADS

Driver

Two MetaPlexTM Composite with Butyl Rubber Surround

 

Tweeter

Diffractionless 1” (25mm) Pivoting, Silk Dome Tweeter, Ferrofluid Cooled

 

Frequency Response

42Hz - 20kHz

 

Impedance

8 Ohms Fixed Crossover

 

Power Handling

5 - 100 Watts

 

SPL

90 dB 1W/1m

 

Diameter X Depth

15 3/4” (401mm) x 8 15/16” (227mm) x 3 7/8” (98.6mm)

 

Retrofit Cutout Diameter

14 1/5”(360.7mm) x 7 3/5”(193mm)

 

FastLoc Grille Diameter

17” (432mm) x 9 5/8” (248mm)

 

Bracket Type

NC6LCRWBi

6.5” Low Profile, In-Wall, Coaxial, Infinite Baffle Loudspeaker w/FastLoc™ Grille

 

Double 6.5" Thumping Trumping sound that fits both vertically and horizontally between standard 2" X 4" studs. They include revolutionary Infinity Edge Grilles that allow the grille to be inserted and locked in either vertical direction.

 

The easy to install WSLCRFL series speakers are a full range In-Wall loudspeaker that incorporates high tech woofer materials with a butyl rubber surround and a state-of the-art Diffractionless pivoting dome Ferrofluid cooled tweeter. This prevents distortion caused by bounce from the baffle The pivoting tweeter allows for deeper penetration into the room and aimable concentrated sound to the sweet spot.

 

The FastLoc™ grille patent no. 8,422,722, is a feature found only at Current Audio. Our design has allowed for the smallest exposed plastic bezel in the industry, truly making it disappear into the mounting surface. The FastLoc™ grille's unique patent pending mechanism allows for a quick installation and removal of the grille while securely fastening it in place to all types of mounting surfaces. Due to the unique design the grille will conform to uneven surfaces including popcorn, heavy textured and uneven ceilings. While our competitors have chosen to utilize magnets in their

designs thus requiring the use of a steel grille that will rust our design allows us to use corrosion and rust resistant aluminum.

Driver Material: MetaPlex™

• This is an electronically bonded substrate on a copolymer cone. Basically it is a trilaminate cone, the first layer is a copolymer base material. The second layer is a material that allows the third layer (green colored surface) to bond to the copolymer.

 

• Copolymer cones alone are found in other speakers. The key to our material is that the green coating allows for a well damped material (the first layer) to combine with a low mass high stiffness coating (the green layer). This improves the performance by stiffening a cone material that is normally used alone in entry level speakers. Better midrange performance and less bass distortion is the result from less cone breakup.

 

 

Tweeter Material: Silk Dome Tweeter

 

• Our silk dome tweeters use a treated silk soft dome. This material is neutral sounding and is used in many higher end bookshelf and cabinet speakers.

WS SERIES - WSLCR650FL
WS SERIES - WSLCR650FL
WS SERIES - WSLCR650FL
WS SERIES - WSLCR650FL
WS SERIES - WSLCR650FL
WS SERIES - WSLCR650FL
WS SERIES - WSLCR650FL
WS SERIES - WSLCR650FL